- Value Set: The package contains a transparent silicone jelly nail mold with a lid, 2 replacement heads and a spatula. The die head is 1.1 inches, which fits most of our natural nails.
- How to Use: Dip in water to scrub the nail stamper glue head, then apply a layer of nail polish, and lightly imprint french nails; if you use a nail template for imprinting, you need to apply nail polish to the image, remove the excess with a scraper, and then pick it up with a stamp design that requires slight rotation of the stamper to transfer the pattern
- Usage Notice: When using the nail stamp board, pay attention to the edges and be careful of scratches; when embossing the pattern, you cannot press it directly, you should rotate the stamper to transfer the pattern to avoid deformation of the pattern; wash the stamper with running water and dry it before use
- Clear Jelly Stamp: The transparent design stamp is easy to pick up the pattern from the template and remove it, so that you can see where you want to place the pattern and save polishing.
- Easy to Clean: The transparent jelly silicone nail polish for nail art can be cleaned thoroughly with a mild detergent.
Product Description
Package include:
✓9 in 2 set: 2 Pcs x Clear nail stamper, 2 Pcs x Spatula, 4 Pcs x Nail Art Stamper Heads, 1 x Nail Stamper Plate
✓4 in 1 set: 1 Pcs x Clear nail stamper, 1 Pcs x Spatula, 2 Pcs x Nail Art Stamper Heads
How to Use:
1.Take out the print head, use cotton dipped in water to scrub the glue head several times to make it easier to transfer the pattern.(If the nail stamper cannot pick up the pattern well in use, you can try to clean the surface of the seal with clean water before use to make it wet, and the use effect of nail polish glue is better.)
2.After a simple repair and cleaning of the nails, a coat of nail polish can be applied.
3. Apply nail stamping polish to desired image within a plate; Scrape across plate with the scraper to remove excessive polish; (Use the scraper at 45-degree angle)
4. Quickly press the stamper onto the plate to pick up the design, stamp the image onto your nail with a rolling motion or just press down and lift up immediately.
5. Press the stamp on the pattern, and then print it on your nails. For lasting, apply the top coat slightly and quickly.
6.When applying nail polish and printing patterns, try to finish it at one time to avoid scratching the surface of the nails; if you don't do it well, you can quickly wipe it off and try again.
7.Finish with a varnish to protect the pattern to avoid scratching or fading.
8.Finally, you can use a cotton swab dipped in nail polish remover to clean the steel plate, scraper and print head.
9.Be careful of scratches when using steel plates and scrapers.
✓Material: Silicone, plastic
✓Color: Clear
✓Note: Take care to use gentle rotation of the stamper to prevent damage
✓Take out the print head, use cotton dipped in water to scrub the glue head several times to make it easier to transfer the pattern.
✓Careful of Scratches: The edge of the scraper is strong and sharp. Please be careful not to be scratched when using it!
✓Clear nail stamper is not deformed, has good elasticity, prevents dirt, and is easy to use.
✓The transparent body is convenient for nail design. It is a good gift for female friends.
✓Different from other clear stamper, we had upgraded the silicone head and make it much durable for doing french nails, which will not leave scratches and marks after pressing
